null
Free Shipping

Free Shipping on US Orders over $200

Model Pro Off White Slow

(12 reviews) Write a Review

$27.99 - $492.92

Save 20% on 2 Gallon size for a limited time! Model-Pro Slow is a low viscosity, two part polyurethane casting resin with a longer working time that contains zero solvents, making it virtually odorless and user friendly.

Maximum Purchase: 10 units

Adding to cart… The item has been added Calculator

Model-Pro Slow is a two component polyurethane casting resin which has a longer working time for larger castings that require more time. Model-Pro Slow comes in either a 6 minute working time or 12 minute working time. It exhibits good impact resistance, strength and has a low viscosity. Model-Pro Slow contains zero solvents making it virtually odorless and user friendly. It also contains no fillers and can be hand mixed or used with automated dispensing equipment. Product uses include: Casting models, prototypes, figurines, proofing molds, making plastic reproductions, etc.. This is an ideal casting resin for professional model makers, hobbyists, crafters, and taxidermists.

Have questions? Visit our FAQ.

Mix Ratio 1:1 by weight / volume
Working Time 6 or 12 minutes
Demold Time 1 or 2 hours
Heat Deflection 140°F +
Shrinkage .001
Color Off-white
Hardness 70-D
Viscosity 150 cps
  • 4 David on Jan 19th 2024
    Model pro

    Very pleased with with model pro slow

  • 4 Eric Fujii on Dec 19th 2023
    Captures detail nicely, but the discontinued 12 min version gave more time to work

    If you work really fast, you can pour molds and still pressure cast with it. Mixes nicely and is easy to cut/sand. Can be difficult to get paint to stick to it.

  • 5 Scott Hardy on Jun 24th 2023
    Great mixing range

    Does exactly what I needed it to do. Works great in casting

  • 4 Dustin Weir on Jan 30th 2023
    overall

    Overall good product, brittle on thin sections of casts, but not a big deal if you account for that with your casts.

  • 4 Tom on Oct 14th 2022
    Pro Off White Slow

    6 min set Mixed well, My mold takes 1.4 lbs of material, I had enough time to get it mixed and poured into the mold.

  • 4 michael click on Jul 7th 2022
    slower set up time

    been using the 2 min resin for over two years with great success. I package a medical device in a single pour mold works great. developed a new product which i use the fast resin for the shell Two halfs and then fill the middle with the slow resin. works great The slow resin gives me enough time to pour the inside full before it sets up and seals the product befor it becomes unusable. As both the fast and the slow cure the same color and texture it is ideal for my usage.

  • 5 JEFFREY SCHMIDT on May 12th 2022
    Model-Pro Slow

    Works very well just would like it to be slightly thicker in viscosity for my needs, but is nice for needs where thinner is better and gives slightly more pot life than others, also works very well with colors be sure to mix color in the clear side of resin first.

  • 5 JEFFREY SCHMIDT on May 12th 2022
    Model-Pro Slow

    Works very well just would like it to be slightly thicker in viscosity for my needs, but is nice for needs where thinner is better and gives slightly more pot life than others, also works very well with colors be sure to mix color in the clear side of resin first.

  • 5 JEFFREY SCHMIDT on May 12th 2022
    Model-Pro Slow

    Works very well just would like it to be slightly thicker in viscosity for my needs, but is nice for needs where thinner is better and gives slightly more pot life than others, also works very well with colors be sure to mix color in the clear side of resin first.